Twitter Add to: Facebook Add to: Del.icoi.us Add to: StumbleUpon

How to change a battery

How To Change A Car Battery: Discover how to change a car battery in a safe and efficient way with VideoJug's easy-to-follow explanation to a car battery change

Set up a secure working environment
Park on a flat and level surface at a safe distance from traffic and any inflammable materials.
Put on the parking brake .....
and put the gear stick into first gear. In automatic cars place the gear stick in the Parking Position.
SAFETY WARNING
Work in a well-ventilated area away from sparks or open flames. Do not smoke.
TOP TIP!
Use a memory keeper for your car's electronic devices.
Disconnecting the battery will erase PIN codes and settings for radios and navigation systems, unless you use a memory keeper.
Temporarily remove the cigarette lighter and plug the memory keeper into the lighter socket.

How To Change A Car Battery

How To Change A Car Battery: Discover how to
change a car battery in a safe and efficient way
with VideoJug's easy-to-follow explanation to a
car battery change

   You will need

        * 1 new battery
        * 1 battery lithium grease
        * 1 adjustable wrench
        * 1 PIN memory keeper
        * 1 wire brush
        * 1 pair of safety goggles
        * 1 pair of rubber gloves
       

 Step 1:
    Set up a secure working environment
    Park on a flat and level surface at a safe distance from traffic and any inflammable materials.
    Put on the parking brake .....
    and put the gear stick into first gear. In automatic cars place the gear stick in the Parking Position.
    SAFETY WARNING
    Work in a well-ventilated area away from sparks or open flames. Do not smoke.
    TOP TIP!
    Use a memory keeper for your car's electronic devices.
    Disconnecting the battery will erase PIN codes and settings for radios and navigation systems, unless you use a memory keeper.
    Temporarily remove the cigarette lighter and plug the memory keeper into the lighter socket.
    If you don't have this device make sure you have all the PIN numbers for your electronic equipment before you start. Use your car manual to see what devices may be affected.
Step 2:
    Open the bonnet
    Release the bonnet with the lever inside the car.
    Move the catch on the bonnet itself to open it.
    Lift the bonnet and secure it with the prop rod.
Step 3:
    Locate the battery
    Look for the battery under the bonnet in the engine block's layout. It is usually in an accessible part on either side of the car's frame. Look for a rectangular box with two attached two cables.
Step 4:
    Identify battery terminals
    Next we are going to find the positive and the negative terminals of the old car battery. You will see a plus sign for positive and a minus sign for negative.
    Usually the positive terminal socket is bigger and has a red cable running from it, whereas the smaller negative terminal socket has a black cable attached to it.
Step 5:
    Disconnect the negative terminal
    Start disconnecting the battery with the negative terminal socket first.
    This avoids creating a short circuit. As the negative terminal is connected to the chassis of the car you always disconnect this one first and reconnect it last.
Step 6:
    Disconnect the positive terminal
    SAFETY WARNING
    You should never connect the two battery terminals directly. Also, never leave any metal objects such as spanner, on the battery, as the two terminals might be connected, causing a short circuit.
Step 7:
    Remove the car battery
    First unfasten the battery holder. Remove any screws, clamps or bars holding the battery in place. Remember how to refit everything for afterwards and store all the parts in a safe place.
    Now carefully lift the battery up and out of the tray.

    Old batteries can be taken to a recycling facility. Do not throw the battery into ordinary waste bin
Step 8:
    Replace battery
    Take the new battery and carefully place it on the tray.
    Fit on any parts that keep the battery firmly in its place.
Step 9:
    Reconnect the positive terminal
    Once the battery is properly in place, check to make sure there is no corrosion on the battery cables. We clean them with the brush as required. Then we can finally reconnect the cables starting with the positive terminal. Tighten the clamps with the wrench.
Step 10:
    Reconnect the negative terminal
    Slide the cable over the negative terminal and tighten the clamp with the wrench.
Step 11:
    Apply battery lithium grease
    Cover the terminals with lithium grease as this prevents corrosion. Spray the grease on carefully, and avoid covering any other parts of the engine block.
Step 12:
    Close the bonnet
    Finally, shut the bonnet firmly and start your car.

    Check if all electronic devices work properly.

    Restart all your electronic equipment by typing in the PIN code if necessary.
    And that is how to replace your car battery the Videojug way!

 

 

© 2008-2014 CarCare Direct. All Rights Reserved. Site design and coding by Revelation Graphic and Web design Hampshire